Serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
Supports 120V AC output from a 120V AC line power source or 12V DC battery source
16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time
Double boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds
OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions
3 stage, selectable 14 / 55 amp battery charger with adjustable settings for wet / gel battery types offers fast, reliable battery recharging
Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
Protected hardwire output passes 120V line power or inverter output through to connected equipment
Reliability enhanced large-transformer design tested to UL (USA) and CSA (Canada) standards
Moisture-resistant construction enables vehicular or marine operation in high humidity environments
3 position operating mode switch supports "auto" mode to enable automatic transfer between DC and AC modes, charge-only to maintain a full battery charge when AC is present without auto transfer and system off settings
Set of six front panel LEDs display AC / DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Set of 4 configuration dipswitches support wet / gel battery charging profiles, adjustable 135 / 145V high voltage auto transfer during overvoltages and selectable 75 / 85 / 95 / 105V AC low voltage auto transfer during brownouts
Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low / high settings
Resettable 12A charger AC input breaker and resettable 20A AC output breaker and automatic 2-speed cooling fan protect the inverter from load and temperature related failures
Grounding lug properly connects the inverter / charger system to earth ground or vehicle grounding system
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop