True on-line, double conversion UPS provides constant, pure sine wave AC output
Maintains continuous operation through blackouts, brownouts, voltage fluctuations and surges with zero transfer time
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
Accepts input voltages between 80V and 138V (65V to 138V at loads under 70%), regulating output to 120V AC +/-2%
1500VA/1200W output capacity with 6 NEMA 5-15R outlets
Two built-in, individually switchable load banks, each with 3 outlets, can be controlled via software interface to selectively reboot remote equipment or automatically shed less critical loads to extend battery runtime for the most critical equipment
Standard internal battery set provides 14 min. runtime at half load and 4.5 min. at full load
Expandable runtime with an external battery packs (BP48V18 and BP48V60RT3U)
Attractive all-black upright tower format
Simultaneous communications via HID-compliant USB port, DB9 serial port, and SNMP/web card slot
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
DB9 serial network interface supports RS-232 and contact closure messaging
Slot for optional SNMP/web card (part# SNMPWEBCARD)
Included PowerAlert UPS Power Management Software and cabling provides monitoring of in-depth site power conditions, full UPS status and fault warnings, output load level and load bank power control
Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
Diagnostic LEDs
Built-in RJ-11 EPO (Emergency Power Off) jack allows connection to site emergency power off systems